How do I use it?

Areas of use: Indoors
Indoor Walls and Ceilings
Coats
2
Apply
Spray
Drying time
10 Minutes

Write a review

Please complete the form below to submit your review.

(*) Mandatory information

Find THE RIGHT PRODUCT FOR THE JOB
Where will you be working?
How to Strip Old Paint from Your Garden Furniture
How to Refresh your Old Wooden Decking
How to Wax your Interior Wooden Dining Table

Ronseal Stain Block Aerosol

Our Stain Block is a unique basecoat that will permanently block your household stains from coming through your paintwork.

Before You Start

Make sure your room is above 10°c. Open your doors and windows for ventilation. Put down dust sheets to protects anything you don't want to get paint on and mask the surrounding areas to avoid overspray. 

Using Your Aerosol

Shake the can until you hear it rattle, then keep going for 1 minute. Hold the can upright, 20-30cm away from the wall or ceiling and spray from side to side to get an even finish. Put on 2-3 coats, leaving 10 minutes between each coat. 

Leave the paint to fully dry for 24 hours before you start to decorate. 

Usage Areas: All interior walls and ceilings. 
Compatibility: Bare and previously painted walls and ceilings. 
Clean Up: Turn the can upside down and spray for a few seconds. Then wipe the nozzle with a damp cloth.