How do I use it?

Areas of use: outside
Smooth Planed Wood
Coats
3
Finish
Satin and Matt
Apply
Brush
Drying time
1 Hour

How much do I need?

Coverage calculator

Write a review

Please complete the form below to submit your review.

(*) Mandatory information

Find THE RIGHT PRODUCT FOR THE JOB
Where will you be working?
Strip Your Garden Furniture
How To Rescue Your Old Deck
How To Wax Your Interior Wood

Ronseal Crystal Clear Outdoor Varnish

Our Crystal Clear Outdoor Varnish is perfect if you're looking to varnish bare wood and keep it's natural colour. Or you can use it to refresh already stained wood

It'll protect your wood from the weather and it won't yellow like traditional varnishes - keeping your wood looking great and natural. 

Before You Start

Make sure it's a warm, dry day (above 10°c) and the wood is clean and dry. 

Prep - Stained or varnished wood

Give the wood a good sand to make sure the varnish sticks. Then give it a clean with white spirit and leave to dry. 

Prep - New Wood

Give the wood a light sand, clean any dirt or dust with white spirit and leave to dry. 
Wear a face mask to avoid breathing in any dust. 

Using Crystal Clear Outdoor Varnish

First give the tin a stir, then brush on in the direction of the grain. 

You'll need to put on 3 coats leaving 6 hours between coats. Before the final coat lightly sand the wood, this will help the varnish stick and give a smoother finish. 

Usage Areas: All outdoor wood. Do not use on decking or previously painted wood.
Compatibility: Suitable for use on, bare or previously stained wood.
Clean Up: Clean brushes in warm soapy water.