Big Hole Smooth Finish Filler
Fixing big holes can be a real pain. It usually means having to do it in layers and waiting for each layer to dry before doing the next. Our Big Hole Filler can fix holes up to 50mm deep in one go. It takes longer than our 5 minute filler to dry, but once it is, you'll be able to drill, screw and nail it.
- Fills holes up to 50mm
- Can be drilled, screwed & nailed
- Won't sag
- Dries in 1-2 hours
Write a review
Ronseal Big Hole Smooth Finish Filler
Our Big Hole Filler is specifically designed to fill large and deep holes up to 50mm deep. It'll set hard so you can drill, sand, plane, screw and nail into it with no problems.
Before You Start
Make sure surfaces are clean, dry and free from dust and grease.
Using Your Filler
Push the filler firmly into the hole or crack. You should leave the filler slightly raised above the wood to make sure the repair is filled. Before it dries, smooth it with a wet knife. Fill bigger holes above 50mm, build the filler up in layers, making sure all previous layers have dried. Smooth over the filler with the Ronseal applicator or a wet knife before it dries.
After 1-2 hours you'll be able to redecorate.
Usage Areas: Plaster, stone, concrete and wood.
Compatibility: Major repairs up to 50mm deep.
Clean Up: Clean all tools with warm, soapy water.