How do I use it?

Areas of use: Indoors
Concrete Floors
Coats
3
Finish
Satin
Apply
Brush and roller
Drying time
4 Hours

How much do I need?

Coverage calculator

Write a review

Please complete the form below to submit your review.

(*) Mandatory information

Find THE RIGHT PRODUCT FOR THE JOB
Where will you be working?
How to Strip Old Paint from Your Garden Furniture
How To Rescue Your Old Deck
How To Wax Your Interior Wood

Ronseal One Coat Concrete Seal

Ronseal One Coat Concrete Seal uses solvent acrylic technology to stabilise and protect concrete surfaces in a one coat formula. It has been specially developed to penetrate porous concrete and form a long lasting stabilising seal, that not only stops concrete dusting, but is stain resistant, repelling water, oil, grease and fuel spills. Once surfaces are sealed, dirt and spills can be easily cleaned without the risk of staining.

Before You Start

Ensure all surfaces are clean, dry and free from grease and oil, dust or loose materials that may interfere with the penetration of the sealer. Grease and oil stains can be removed and driveways cleaned by using Thompson’s Oil and Drive Cleaner. Use in accordance with application guidelines. Open your doors and windows for ventilation. 

Using Your Concrete Seal

Shake well before use. For best results use a long pile roller and a roller tray or a brush. Extremely dusty or porous surfaces may require a second coat. Allow 4 hours between coats.

Usage Areas: All concrete surfaces. 
Compatibility: Can be used over any stone or concrete surface. 
Clean Up: Clean all brushes with white spirit or brush cleaner.