How do I use it?

Areas of use: outside
Radiators
Coats
3
Apply
Brush
Drying time
30 Minutes

How much do I need?

Coverage calculator

Write a review

Please complete the form below to submit your review.

(*) Mandatory information

Find THE RIGHT PRODUCT FOR THE JOB
Where will you be working?
How to Strip Old Paint from Your Garden Furniture
How To Rescue Your Old Deck
How To Wax Your Interior Wood

Ronseal Quick Drying Radiator Paint

Ronseal Quick Drying Radiator Paint provides long lasting protection to your radiators. It delivers a tough, heat resistant barrier that protects against everyday knocks, scuffs and scrapes leaving a brilliant white enamel finish.

Before You Start

Always ensure that radiators are turned off and cold before painting. Surfaces should be clean, dry and free from dirt, grease and loose material. Pur down dust sheets to protect anything that you don't want to get paint on. Mask off the surrounding areas to avoid overspraying. Give the area a quick sand and remove any dust. Remember to wear a face mask. Open your doors and windows for ventilation. 

Using Your Radiator Paint

1. Shake the can well until you can hear a rattle, then continue shaking for 1 minute. 

2. Hold can 20-30cm away from the surface and spray in a sweeping motion. 

3. Apply 2-3 coats leaving 30 minutes in between each coat. 

4. Leave to dry for 24 hours before you turn the radiators back on. 

Usage Areas: All household radiators.
Compatibility: Primed, factory finished and previously painted radiators. 
Clean Up: Turn can upside down and spray for a few seconds. Then wipe the nozzle with a damp cloth.