Ronseal One Coat Satin Black Paint is a superior, quick drying paint, which offers an exceptional quality mid-sheen finish for interior metal. It transforms and rejuvenates interior metal and wood without the need for a primer.

10m˛ per litre depending on the texture and porosity of the surface being treated. Touch dry in 1 hour. Overcoat after 4 hours if required. Low temperature, high humidity or poor ventilation may extend drying and recoat times.

Ideal for use on interior metal, wood and walls including furniture and wrought iron.

Protective smooth satin finish

One Coat is recommended

Touch dry and showerproof in 1 hour

Surfaces should be clean, dry and free from dust, dirt and grease. On bare metal remove any loose rust with a wire brush or abrasive paper. Wipe clean with white spirit. Treat any areas of rust with an appropriate treatment. On bare wood sand lightly to remove any loose fibres. Wipe down with white spirit to remove dust. Repair any holes or cracks with Ronseal Multi-Purpose Wood Filler. Stir well before and during use. Apply using a synthetic filament brush suitable for the application of water-based products. One coat is usually sufficient, however, bare wood will require a second coat. Allow 4 hours between coats.

Remove as much product as possible from application equipment prior to cleaning. Wash out brushes with water and detergent. Some Local Authorities have special facilities for disposing of waste products. Do not empty undiluted product into drains or watercourses. Clean surfaces with a detergent solution and avoid abrasive cleaners.